Answer
Aug 02, 2021 - 03:28 PM
Thank you for including the VOCOMP20 product Specification Sheet.
The VOCOMP20 is a water-based acrylic concrete curing and sealing compound product that works by coating the surface preventing any water intrusion into the concrete leaving a transparent sheen finish.
Our SealGreen Kennel Sealer will not work if it cannot penetrate the concrete and react. Therefore, you will have to either wait at least 12 months before the SealGreen Kennel Sealer can be applied or remove chemically or mechanically the VOCOMP20 to allow the SealGreen Kennel Sealer to penetrate the concrete and react appropriately.
If it is necessary to cure the concrete immediately after installation, we recommend using SealGreen Cure and Seal which is 100% compatible with the SealGreen Kennel Sealer. If you use our SealGreen Cure and Seal to cure, you can apply the SealGreen Kennel Sealer as early as 5 days after the concrete installation.
None of our products will affect the normal cure time of the concrete. Please watch the video on how the SealGreen Cure and Seal is applied. SealGreen Cure and Seal is typically applied immediately after the concrete is finished while the concrete is green and wet. Most of the contractors using our SealGreen Cure and Seal sealer, cure their concrete installations as they finish each section which allows the concrete to retain the moisture require for concrete to cure correctly. No need to wait for the concrete surface to harden for some to walk on it to apply the cure and seal.
How to apply SealGreen Cure and Seal video
How to apply SealGreen Kennel Sealer video
Source: SealGreen Website
